Custom signal architecture made easy
Eleven single-process modules
Instantly enhance the functionality of your plug-ins and DAW with eleven different signal modification units. Explore new creative possibilities and quickly add missing features. Each module can easily be inserted, swapped and moved around making new options to correct, convert or tweak your audio.
Expand your system
SigMod contains many useful, creative functions which are otherwise difficult to engage. Combine these single-process modules in any order to design the precise routing you require. Auto-resizing keeps the signal flow and functionality clear at all times.
- Master & channel strip features
- Signal monitoring & routing options
- Mid/side conversion
- Output level protection
- Frequency banded splits
- 1000's of possibilities...
Use stereo plug-ins in mid/side mode
Add mid/side functionality to classic stereo compressor and EQ emulations, or get creative with mid/side delays, distortion and many other effects by inserting the mid/side encoder/decoder either side of any left/right plug-in instance.
Protect speakers, ears & sanity
Insert the Protect unit across your output bus and this safety module will automatically cut in to prevent bursts of noise or feedback howls due to system errors, saving both your nerves and your speakers. Manual or auto reset options give you the level of protection you need - a real gift when working with headphones!
Tap and crossover
Want to try some parallel processing? Drop in the Tap module and you are good to go. Use the Crossover module to split the highs from the lows to apply different effects to different frequency ranges - great for avoiding muddying up the low frequencies or getting creative with automation and sweep effects.
For your DAW
Several of SigMod's modules offer easy access to functionality which is either missing from certain DAWs, or at least complicated to access natively. Solo/mute or trim the left and right sides of a stereo signal independently, or easily flip the stereo image in one click. Quickly detect and correct DC offset to retain valuable headroom.
How does your mix sound in mono? Think about how many listeners will be using a phone or a DAB radio with one speaker - the Mono module switches your signal from stereo to mono in one click. You can also check the phase relationship between your left and right channels with the Phase module.
Your imagination is the limit
With SigMod's creative signal routing - particularly the Mid/side, Tap and Crossover modules - the possibilities are virtually endless, not to mention easy and tweakable.
Ever wondered how your go-to tape emulator would sound in mid/side mode?
Splitting your vocals into 6 different frequency bands and sending each of them to a different compressor?
How about 600 to 800Hz through your favourite guitar amp sim, and the side channels above 13kHz sent to a giant hall reverb? Unusual, but very easy.
Full list of modules
- DC offset
"Competetively priced and a real joy to use. A ton of pro tricks can be perpetrated with SigMod. Brilliant."
"A utility that is simple and easy that helps sort out some basic issues, (SigMod) is a correction time saver."
Paul McCartney, Ricky Martin, Kiss
8 elite plug-ins delivering deeper control over your full production workflow. From EQ, stereo panorama and low frequency content to mixing and mastering for today’s streamed delivery services.
Bring transparent solidity to your bass; sharpen, define and align for the tightest mix. Monofilter anchors your bass with ease, while retaining the perceived spatial characteristics of the original sound.
Expand your stereo image. Mono to stereo, stereo to super-wide and everywhere in between. Natural extension or extreme effects, Stereoizer provides it all.
Focus in on the frequencies you want to move using the intuitive solo controls and then tweak/fix/align them in the stereo panorama without affecting any other regions – simple, quick and effective!
Powerful, flexible audio analysis, giving you immediate access to precisely the information you need, when you need it, through a unique, intelligent window system.
We support AAX, VST, VST3, AU and AudioSuite in both 64-bit and 32-bit versions.
Minimum system requirements
Mac OSX 10.7.x / 512 MB RAM
Windows XP or above / 512 MB RAM